Not only you but there are many users all around the world who reported about this annoying Windows Update Error 0x80070057. When you attempt to install the Windows update on their device, this error appears. Hence, this particular issue might be caused by malware, each of which can be controlled or modified using the registry or faulty files or settings in the device.
Don’t worry. It is not such a difficult error that you could not even fix. In this article, we bring forward some easy, simple, and latest steps to fix windows update error 0x80070057 quickly. Let’s start.
Overview of Windows Update Error 0x80070057
The 0x80070057 error code while updating Windows indicates that Windows encountered a storage problem, i.e., you ran out of storage on your hard disk drive or SSD before attempting to download or transfer anything. Hence, this warning could probably imply a defective hard drive, an incompatible file system, or any other storage-related trouble. However, this specific alphanumeric error code “0x80070057” is frequently encountered by Windows Vista, 7, 8, and 10 users.
Depending on where the error in the update service is located, the message that appears when error 0x80070057 occurs may vary, but it is typically a variation of “Unknown error”, “Required services are not operating” or “Unspecified parameters encountered. Also, this particular error may alternatively show a slightly different message, like “Something went wrong.”
Causes of Error 0x80070057
The 0x80070057 error code may appear to you for a number of reasons. We’ve touched on a handful of them here. Do have a look below –
- When you update Windows 7, especially on a Windows 10 computer.
- When you are installing the latest Windows 7 operating system.
- If you are attempting to restore your files.
- In case you set up a new profile in the Microsoft Outlook program
- If you harm the system’s System Reserved Partition.
Simple Methods to Fix Windows Update Error 0x80070057
Here, we will share with you some of the common and easiest methods, which will help you eliminate Error 0x80070057 quickly. All you just need is to stick to these simplest methods.
Method 1: By Using the Troubleshooter Option
You may be able to resolve Error code by troubleshooting. to have it all repaired, take these steps:
- Type “Troubleshoot” in the search box after clicking the Start button on your desktop. Then to make the Settings window appear, double-click the output.
- Next scroll down the right side of the Settings panel and then select Windows Update from the Get started section.
- Now, select the Run Troubleshooter button.
- Allow the troubleshooter to finish diagnosing the problem. Now, select the Apply this repair option. Patiently wait for the troubleshooter to resolve Windows Update.
Lastly, close the troubleshooter and restart your computer after the repair is complete.
Method 2: Uninstall the Cloud Fogger from the Device
The Cloud Flogger application of the system might sometimes be the primary cause of Error 0x80070057. The installation of filter drivers that are incompatible with system calls by third-party applications like Cloud Flogger which is the reliable source of this problem. Therefore, removing the Cloud Fogger from your device might help you eliminate Error 0x80070057. Follow the below mentioned steps properly –
- Open the Run Command box by simultaneously hitting the R and Windows keys on your computer.
- Secondly, in the Run Dialog box, type ‘appwiz.cpl’ and press OK
- After that, open the new window’s “Programs/Apps and Features” area.
- Next, move to the bottom to find the Cloud Fogger app. Thereafter, right-click on it.
- From the menu, select Uninstall.
- At this point, you must wait till the uninstalling procedure is finished.
- Now, restart the system thereafter in order for the adjustments to take effect.
Lastly, to see if the error has been fixed, try updating the operating system.
Method 3: Change the Name of the Software Distribution Folder
This is also an effective method to help you get rid of Error 0x80070057. Therefore, to give it a try, follow the steps below –
- To begin, open the Run Command box by simultaneously hitting the R and Windows keys on the computer.
- Then, in the Run Dialog box, type ‘%systemroot%’. To execute the command, press the Enter key on your keyboard.
- You must now locate the ‘Software Distribution’ folder and right-click on it. Select the ‘Rename’ option from the menu.
- Change the name of the ‘Software Distribution’ folder to ‘old.’
- When Windows asks for administrator permission, click the Yes option.
- After that, enter “services” into the Windows search box and l Launch the Services menu. Then, you must verify that the status is Started. You must now look for the running service with the name “Windows update.”
- You need to log out of all system apps after making these modifications. Lastly, the system should then be restarted to save the modifications.
Method 4: Windows Date and Time Synchronization
If the date and time in the windows clock are out of their general settings, the Error code 0x80070057 might occur. Fixing it is not a tough task. Follow the below mentioned steps –
- In Windows 10, choose Adjust date/time by right-clicking the taskbar.
- If you’re using Windows 11, use Win + I to open the Settings program, then select Time & language > Date & time.
Note – Recommendations:
- Manually set the time
- automatically make adjustments for Daylight Saving Time
- Manually set the time zone
- Once they are configured, click Sync to confirm.
Method 5 – Do/Run Chkdsk
Chkdsk is considered as the quickest way to locate and fix damaged files where your whole hard disk could be searched by this Windows application for any faulty components.
- Here, To run Chkdsk, click Win + E to open File Explorer, browse to This PC, right-click the system drive, and choose Properties.
- At this point, select Check and Scan Drive from the Tools menu. The background check will be performed. If any issues are detected, you have an option in how to handle them.
- Lastly, restart your computer after you’ve repaired them.
Method 6: Start the System Update Readiness Tool (SURT)
System Update Readiness Tool (SURT) is a Microsoft-developed force-update method designed to address update difficulties such as the one discussed below. SURT will assist you if you are using Windows 7/8/10. To run, follow the steps below –
- Install and save the SURT tool to a convenient location.
- Select Run as administrator by right-clicking on the application.
- Now, allow the procedure to complete before restarting your computer.
- Lastly, check to determine whether the problem has been resolved.
We hope this article got all your issues sorted out. We must have resolved “Windows update error 0x80070057” as these are the easiest and simplest methods to fix it. If you are still experiencing issues, please reach out to our team for assistance. We are happy to help you troubleshoot and fix this error. Have you been able to resolve the problem on your own using one of our solutions? Let us know in the comments below.
Frequently Asked Questions (FAQs)
Q1: What is Windows 10 error code 0x80070057?
Ans: Error Code 0x80070057 in Windows 10 states that the input is not correct. This signifies that you get an issue while attempting to display a user’s “greater accessibility” to a file.
Q2: How can I resolve error code 0x80004005?
Ans: To resolve error code 0x80004005 on your device, follow the steps –
- Launch the computer.
- During the launch, press the F8 key to start the computer in safe mode.
- Now, press Start, Run, and then enter regedit. Hit the OK button.
- The registry subkeys HKEY USERS and the following ones should be deleted.
- Close the Registry Editor window and then turn the computer back on.
Q3: What measures should I take to troubleshoot Windows Update?
Ans: Whenever you encounter an error code when downloading and installing Windows updates, the Update Troubleshooter can assist you in resolving the issue.
Follow the steps below –
- Click on Start > Settings > Update & Security > Troubleshoot > Additional troubleshooters.
- Then, under Get started, choose Windows Update > Run the troubleshooter.
- After the troubleshooting has finished, restart your device.
- Check for fresh updates next
- Later, choose Start > Settings > Update & Security > Windows Update > Check for updates, and then install any updates that are available for your device.