Are you losing control over your high-end game? Does your Xbox controller keep disconnecting from the console? If you are too experiencing this terrible issue, then you must be scratching your head, as it can ruin the entire play at once. However, finding a perfect way to rectify it can be complicated and troublesome, but you don’t need to worry anymore as we have arrived to rescue you. Well, we are coming up with a guide that consists of the top 8 ideal ways to rectify  “Xbox controller keeps disconnecting.” You just need to read all through its way and get your Xbox controller working back as normal. 

Why Does My Xbox Controller Keep Disconnecting?

Xbox Controller Keeps Disconnecting

If you are also stuck with the question, “why does my Xbox controller keep disconnecting” then the time has come to get the answer to this question. There are five possible reasons for this problem. Let’s understand the causes first so that we can get the solutions better. 

  • Dead Batteries: If the battery of your controller is low, then you won’t be able to maintain a proper connection between your console and the controller, and it will start disconnecting frequently. Hence, you will need to replace the batteries.
  • Huge Distance: If you are playing with the help of a projector, then you are more likely to encounter the issue of disconnection as the distance between your console and controller increases, which tends to disconnect frequently. 
  • Outdated Controller Firmware: If your controller is not updated, then it will find a hassle to work with your updated operating system. Thus, you are required to update it on time. This way, you can avoid random issues as well.
  • Outdated Xbox Controller Driver: If the drivers of your controller are not updated, then you are more likely to encounter the issue of disconnection. Here, you are required to update your drivers so that you can resolve the issues like “Xbox one controller keeps disconnecting” and “Xbox Controller Not Connecting to PC.” 

8 Surefire Ways To Fix Xbox Controller keeps Disconnecting

After knowing the causes, it is time to get into resolving methods. Thus, we are coming up with the top 8 troubleshooters to fix the problem “Xbox one controller keeps disconnecting.” However, the following methods have been prepared with full-fledged research by our top experts. You can try the following methods one by one and get your controller back working usually.

1. Move Closer to the Console

This is a reason-based troubleshooter that comes first on our list. One of the primary reasons why my Xbox one controller keeps disconnecting is the distance between your console and you. Thus, the controller cannot establish a perfect connection with the console. Hence, you must move closer to the console. And check if you are able to establish the connection without random brakes.

Here, a lot of people think that it is possible to play a video game with a distant space between you and your console. Well, the answer is yes, one can play the game via projector to have better gameplay, but it results in the terrible issue of random disconnects. Thus, you must try reducing the space between your console and controller.

2. Check the Battery

Low battery is one of the most common reasons why your Xbox controller keeps disconnecting. A low battery won’t let you connect properly and play seamlessly. Thus, you must check for the battery if it is low, then you must charge it fully, then start playing again. This way, you can eliminate the issue easily. In addition, if your controller has batteries in it. Then you must try replacing them as it no longer provides your controller enough energy to let you play with more smoothness.

3. Power Cycle the Controller

Power cycling your controller can give it a refreshing start, and this way, you can improve the performance of the controller. This will promote a hardware reset in your controller. Let’s see how one can do so.

Power Cycle the Controller

Well, it’s not tough to do. You just need to press a jewel button present on the Xbox controller until the controller turns off completely, then wait a couple of minutes. After that, you must restart the Xbox controller and check whether the disconnecting issue has been resolved or not. 

4. Re-Pair the Controller

Another thing that you must try to eliminate the issue of “Xbox one controller keeps disconnecting” is repairing the controller with Xbox. This is not that difficult to do. You are just required to follow the below-written steps.

  • Press the pair button on your Xbox and hold it for a few seconds till the flashlight gets on.
  • Now, press until the jewel button starts to blink on both of the consoles. 

After doing the above steps, you must check if the issue has been resolved or not. If not, then you can jump on to the next method to rectify the issue.

5. Use a Wired Connection

Wired connections are always frequent and constant, either in the case of the internet or the case of the console. Thus, you are required to have a wired connection instead of connecting with Bluetooth. It may be annoying at first, as you will need to sit with a limit as you are connected to the wire. However, with the wired connection, you can unlock the experience of playing a 3D game with the ultimate gameplay. Hence, you must use a new and working USB cable. This way, you can check where the problem is actually located.

6. Update the Controller Firmware

If it’s been an extended period and you haven’t updated your firmware, then the time has come to do the task. Sometimes, outdated firmware of the controller is unable to work with the upgraded versions of the console. Then the issue of disconnection comes to light. Thus, the user will need to update the controller for better performance. If you want to know how to do so, then the below steps are for you. Check them out.

Update the Controller Firmware

  • Get into the Xbox settings. 
  • Click the Device and connection option coming in the left pane.
  • Now, select accessories on the screen.
  • Select the accessory controller and let the next screen open.
  • Click the three dots coming under the option “configure.”
  • Here, you can see an option to update the accessory.
  • Click it and continue with the on-screen wizards.

After doing the above steps, one must restart the console and the controller. This way, you can execute the update in a more efficient way.

7. Update the Xbox

If the above methods don’t work out for your controller, then you will need to update your Xbox. In most cases, your Xbox gives you a prompt to update it. But if you didn’t get one, then you must manually check for the updates and upgrade your Xbox if needed. Confused about how to do it? Well, we have provided you with the easy steps in the below section.

  • Launch your Xbox settings menu.
  • Click the system from the left pane.
  • And now, in the next lift on the right pane, select the updating console.
  • Click “Update now.”
  • Wait until the update is completed.

8. Replace the Controller

If your Xbox controller keeps disconnecting, it may be time to consider replacing the controller. This problem can usually be fixed by replacing the battery or using a different USB cable. However, if neither of these solutions works, it is likely due to an issue with the hardware itself and you should consider investing in a new controller. Replacing the controller is easy and inexpensive compared to having professional repairs done. It’s worth trying this solution before attempting more complex methods that may take significantly more time and money. This simple fix could save you a lot of hassle and get you gaming again in no time.

Frequently Asked Questions

Q1. Why does my Xbox controller keep disconnecting

If your Xbox controller keeps disconnecting, then it must be an issue with your signals. You must reduce the distance between yourself and the console. If your device is out of date, then you must update your device.

Q2. Why does my Xbox controller keep turning off even with new batteries?

If your Xbox controller keeps disconnecting even with the new batteries, then the problem is something else. But what can it be? Well, the problem can be virus attacks and other signal problems. You can resolve it with the troubleshooting guide that we have presented above. 

Q3. Why won’t my wireless Xbox controller stay connected?

There are various reasons why your Xbox controller won’t stay connected. The possible reasons are– bugs, low charging, and malware attacks.

Conclusion

In a nutshell, we have provided you with the top troubleshooting method to fix the problem of “Xbox controller keeps disconnecting.” You can try any of the above methods to fix the problem. If none of the methods works for you, then you can try replacing your controller, as taking it to the repair will cost you the same as the new one. However, if you are still having any problems, then you can connect us anytime.