If youre in the market for a new laptop, one thing to consider is whether you should get an SSD instead of a traditional hard drive. While SSDs used to be more expensive, their prices have come down in recent years and they offer a number of advantages over hard drives. In this post, well walk you through the process of how to install SSD on your laptop. Well also discuss some tips for maximizing the performance of your SSD. So if youre thinking about making the switch, keep reading!

how to install an SSD

Stuff to Gather and Points to Note

Before starting this remember, before SSD installation. Any basics of how to install a hard drive in a PC do not open the SSD. Once open the warranty will be void. For the protection of the SSD, make it a point not to touch the connectors. Other than that, to follow how to install SSD in a PC, get a screwdriver. 

The system manual of the system in use. You must also perform the task in a static-safe environment. Away from any sort of plastic bags or papers and also dust since you will be opening the inside of the system case.       

Before Installation Perform Cloning 

You need to first prepare the solid-state drive that you are going to install in the system. This is a very basic first about how to install an SSD. We suggest calling the manufacturer to figure out the details of your system. Choose the SSD device that would fit your system.

Thereafter the SSD you have selected needs to be connected to the system. Go to Disk Management, then right-click My Computer and select Manage.  

Go to Disk Management,

Once you have done so, the process of how to install SSD in PC can now begin. 

You can perform SSD installation without the need of reinstalling Windows. First comes the process of disk cloning. I am sure youre familiar with the name concerning how to install an SSD. This task is often performed when the SSD is set to be used as the primary drive. 

The transfer of data between the target drive, that SSD, and the source drive that HDD is safe and reliable. There is multiple PC cloning software available on the Internet. 

This cloning software is free to use and would do the deed well without the risk of a loss of data. MiniTool ShadowMaker is a good choice in this matter. 

We are listing out the details of how to perform cloning. 

How to Perform Cloning? 

So finally, once you have selected the solid-state drive for your system. The cloning using PC cloning software needs to be performed. Starts the process of SSD installation, 

  1.  Connect the SSD and make sure the system recognizes the drive. 
  2. Double-click on the PC Cloning software youre using. 
  3.  Enter the Tools tab of the said software, and select the Clone Disk option. 
  4. Follow the instructions appearing thereafter. Select the target drive the SSD and the source drive the HDD. Select OK. 
  5. The cloning process has now begun. It usually takes up a good few minutes. 

How to Install SSD? 

ssd installation

We must now then finally proceed to the actual process of SSD installation. We will be writing here the step-by-step process of how to install SSD in PC. 

  1.  Open the back of the computer case. Use a normal screwdriver to perform the task. Then disconnect the cable. 
  2.  Once youre done, remove the battery.   
  3.  Remove the source drive from the storage bay. 
  4. Place the SSD in the disk bracket that you see. Fasten the SSD. 
  5. Follow the same process by fastening the disk bracket after the SSD has been fastened inside. 
  6. Close the back of the laptop and screw back the fasteners. 

For M.2 SSD

If youre dealing with an M.2 SSD, the process of how to install an SSD is very similar. The process is more or less the same for both laptops and desktops. 

  1.  Open the back case. 
  2. Select the M.2 slot and thereby place the M.2 SSD. Simply make sure in the case of laptops the right way to place the product writings facing upwards. 
  3. Close the back case and tighten the screws back. 

SSD for Desktop

how to install SSD in PC

Next comes how to install SSD in desktops. 

  1.  Like the protocol to be followed while installing every other hard drive, disconnect power. 
  2. Look for the location of the largest hard drive installed and in use. 
  3. The SSD will now be required to connect with the motherboard to be done using the SATA cable. Followed by using the SATA cable and connecting the SSD with the PSU. 
  4. Place the SSD in the tray now. 
  5.  Place back details of the desktop to what it was. 

The final task in these entire steps of how to install SSD is the action of Boot. 

Perform Boot After SSD Installation 

Primarily while using two hard drives. The task of PC Boot becomes important. There are a multitude of ways to boot. Short-cut keys like F2, F12, and F10, are all applicable based on the configurations and brands of the system. once you complete the boot, save the changes to SSD in the BIOS menu after the first boot sequence.

The system has now followed every step of how to install SSD. 

Tips for maximizing the performance of your SSD

1. Keep your SSD clean

maintaining a moderate amount of free space on your solid-state drive (SSD) can help to improve its performance. When an SSD is nearly full, it has to work harder to write new data, which can lead to slower speeds. Therefore, its a good idea to keep some empty space on your drive, if possible.

2. Keep your system up to date

Out-of-date drivers and software can lead to compatibility issues and decreased performance. Therefore, its important to keep your operating system and all of your software up to date. For most people, the easiest way to do this is to use their computers built-in update features.

3. Use an SSD optimization tool

Many SSD manufacturers offer optimization tools that can help to improve the performance of their drives. These tools typically include features such as drive defragmentation and TRIM support. By using an SSD optimization tool, you can help to ensure that your drive is running at its best.

4. Avoid unnecessary writes

One of the biggest key ways to prolong the life of any SSD is by avoiding unnecessary writes. Writes put strain on the flash memory in an SSD, which can eventually lead to wear and tear. Therefore, its best to only write data when absolutely necessary. For example, if youre frequently saving and deleting large files, consider storing them on a different type of storage device, such as a hard drive.

5. Store backup copies elsewhere

If you have sensitive data that you want to keep safe from accidental deletion, consider storing backup copies elsewhere, such as on an external hard drive or in the cloud. That way, if you do accidentally delete something from your SSD, youll have a backup copy that you can restore from.

Read more: BEST SSD CARD | 6 LATEST SSD CARDS SUGGESTED BY EXPERTS

Now you’re Aware of How to Install SSD

That brings the conclusion to my article. Do follow the process and the protocols of how to install SSD. When you complete the task, the system will work much faster. SSD also takes care of good period longevity of the system. We hope this article did assist you.

Frequently Asked Questions 

Q.1) Can you just add an SSD to the PC?

Yes, without any need for a system upgrade, SSD can be added to the PC. SSD is both compatible with PCs and Macs. There is an option of using both the HDD and SSD. HDD is the disk drive & SSD is the primary drive. 

Q.2) Can I install an SSD on my own?

The process to install an SSD is user-friendly. You do not need to have much knowledge about the underlying computer to change the SSD. Follow the simple protocol and then the instructions mentioned would complete the task.