memz virus

Have you ever encountered MEMZ virus-related warning messages, intrusive pop-up messages which constantly open, or other undesirable structures? If so, you have a good probability that this virus has infected your system.

As soon as the MEMZ is installed on your Windows system, it completely damages your computer, leaving it very unsafe.

This article will explain what MEMZ virus really is, how it impacts your system, and how to completely eliminate it from your system. Moreover, This virus is popular because it often comes combined with free software or while visiting a malicious website. Don’t wait, keep reading. 

What Is MEMZ Virus?

The MEMZ virus is a destructive Trojan virus that is designed solely to attack the Windows operating system. It refers to the program that the operator accidentally downloads or orchestrates through the web browser.

This was presented by a “Leurak” YouTube channel viewer. Typically, this malware affects the OS Boot Sector and it immediately launches and is pretty complex. The last payload hurts the system more than the first and final payloads. Due to the web’s broad use and the MEMZ virus’ destructive nature, it is incredibly well-known. Indeed, It is a dangerous piece of malware that can damage your computer.memz virus

What Destruction Can The MEMZ Virus Do?

The primary objective of the MEMZ virus is to disrupt the MBR by removing the first 64 bytes of memory of data on the computer’s hard drive. It has two components, one of which is beneficial and the other of which is harmful. Having the power to erase data at any time and severely damage your machine, each of these dangers is equally scary.

The virus’s clean component has a control box with several possibilities, along with a  Tunnel Effect, Flashing Screen, Reverse Text, Randomized Keyboard Input, etc. Despite using the Task Manager, you cannot terminate this software. The computer and the Master Boot Record will ruin if you dare to do so. It is hard to modify or eliminate the destructive edition of MEMZ. This might seriously endanger the computer if it were to run on one.

Symptoms of MEMZ Trojan

The existence of the MEMZ trojan horse can be identified by a variety of visible signs. Those are mentioned below –Symptoms of MEMZ Trojan

  • Restricted content is shown when the web browser opens.
  • Multi Colored flashes will appear on the desktop screen.
  • Unpredictable programs launch and shut off without notice.
  • A blue screen notifies you that a disaster spill is going to happen and will make your computer unbootable.
  • On the screen, the adorable Nyan cat animation soars.
  • There are frequent system failures.
  • A notepad window displays an unacceptable statement.
  • Last but not the least, Many similar points follow the mouse cursor in a huge group.

How Is the MEMZ Virus Transmitted?

The MEMZ threat is often transmitted via third-party applications, fake websites, and email attachments. You may directly open a link in an email that installs MEMZ to your computer or visit a pop-up on a website that causes the malware to launch. However, Your computer has virus meme (irrelevant please check) if you utilize freeware file hosting sites, freeware wememz virus sites, or peer-to-peer networking like Torrent sites.

Remove Memz Trojan Virus  

Here, we will discuss “how to remove MEMZ trojan virus”. We are forwarding you some methods on how to get rid of reimage repair pop ups below.

Run a Virus Scanner

To detect and get rid of the infection, you can run an antivirus application on your computer. To apply, for the steps –

Step 1: Put your PC in Safe Mode with Networking and restart. Run a Virus Scanner for windows 7

For Windows 7 

Repeatedly press F8 until the Advanced Boot Options box appears, and then select Safe Mode with Networking.

For Windows 8/10 

Hold Shift while pressing Restart. Then, Troubleshoot > Advanced Options > Startup Settings > Restart > F5 to enter Safe Mode with Networking.

Step 2: Launch your browser and install trustworthy anti-spyware software like Malwarebytes, Reimage, etc.

For Windows 8/10 Reset your Computer or System

The data can be recovered by restarting the computer or system. In fact, The user unintentionally installs this file through the web browser. To simply remove the MEMZ malware, follow the instructions :

  • Firstly, Press Win+I on the keyboard to access Window Settings.
  • Press the Update and Security buttons.
  • prolong the healing
  • In the main menu, select Reset this PC. To begin, click the Starte button.
  • Pick the Remove Everything option to get clear of the defective files. Do this after completion.

Eliminate the MEMZ Task

One of the easiest and quickest remedies for this problem is to task kill or terminate the MEMZ task. To finish the procedure, you only need to run or execute a simple script in Command Prompt.

You may swiftly and successfully eliminate the abomination using the steps :

  • To get more advantages, sign in as a system administrator to Command Prompt. You simply need to type it into the search field and select “Run as Administrator.”
  • Click on Enter Taskkill / f / im MEMZ.exe to input the command and run the procedure.

If you wish to terminate the process, you can disable it. Even while it isn’t the only technique to get rid of the virus, it will undoubtedly help to lessen its impact on your device.

Make the OS Master Boot Record fixable

One of the partition components of the system that the MEMZ virus affects is the Master Boot Record. A Windows failure, unconnected to the MEMZ trojan, might result by interfering with this vital element of the computer. To rectify the issues, you should utilize third-party partition management tools. Follow the steps below –Make the OS Master Boot Record fixable

  • First, Click the Partition Wizard to launch this partition manager from the MiniTool PE Loader interface.
  • secondly, You can enable Rebuild MBR by right-clicking the computer disc afflicted with MEMZ.

Protecting Yourself From The MEMZ Trojan Virus

The Trojan virus may be quite unpleasant, as those who have dealt with its consequences will attest. Thus, You must follow these safety measures to safeguard your privacy and defend yourself from virus attacks.

  • Before downloading, verify the software’s sources.
  • You should delete any shady emails from your mailbox.
  • Remove pop-ups and intrusive website advertisements.
  • Invest in antivirus software and keep it updated.
  • Avoid connections you don’t know about.
  • Lastly, Make a sound Restore Point.

Frequently Asked Questions:

Q1: What is the memz virus?

Ans: The MEMZ virus is a freeware dangerous file that users inadvertently download from the internet. Leurak, a watcher of the “Viewer Made Malware” series on Danooct1’s YouTube channel, initially built this  The operating system’s Master Boot Record is the target of the MEMZ malware.

Q2: How to get rid of reimage repair popup?

Ans: To get rid of reimage repair popup –

  • First, Reimage Repair ads should be removed from Mozilla Firefox.
  • Eliminate undesirable Scheduled Tasks
  • Clear the shortcuts in the browser to get rid of the Reimage Repair redirect
  • Remove Reimage Repair from Google Chrome redirection
  • Finally, Utilize the Windows Control Panel to remove suspicious and unauthorized software

Q3: Who is the MEMZ Trojan’s creator?

Ans: Leurak initially designed MEMZ. He designed this for YouTuber danooct1’s Viewer-Made Malware series.

Get Windows 7 Factory Reset

Are you too struggling with a fritz PC or your device is having some miscellaneous issues? You might be done using every way possible to get rid of that problem but nothing quite works. Then your solution might be resetting your device. “Windows 7 Factory Reset” allows the user to have a freshly set up device that would now not be running slow or have any other problem as it would clear up the device in the best way. Factory reset windows are your go-to option to get all your problems solved and make your device run smoothly again. 

What is Windows 7 Factory Reset?

A factory reset is a process that includes the erasing of all data from your hard disk and other existing set-ups. The resetting process includes deleting files and data & reinstalling all those things again for a fresh setup. You can do this to get rid of the issue.Windows 7 Factory Reset

Sometimes the problems of the device are not solved by anything you try then resetting could be your solution to make your device run smoother again. Although it is not something people choose as the first choice, it can be the solution to the problem of your device. 

How to Save Data Before Windows 7 Factory Reset?

Before heading into different ways to factory reset windows 7 and you can factory reset Windows 10 also, you need to know that in this process you would lose your existing data, so to save that data, you need to make a backup for those data and files. Following are a few steps that would help you to create a backup before the factory restore process:

  • Firstly, you need to go to the start button and open the control panel
  • Then click on the system and security option
  • You now have to select the option with backup and restore
  • Now create a system image option which will be available on the left pane
  • Choose the” on a hard disk” option to create this backup on that location
  • Now you can select whatever external hard drive you want to have your backup on. 
  • After that select the Next button
  • Then click on the start backup button at the bottomSave Data Before Windows 7 Factory Reset

This would start the whole backup process and create your backup on the selected location. With these steps, you can easily save your data. 

Once you are done with this process of backing up your data you might think of, how to factory reset Windows 7. Here is your answer with different ways in which you can reset your windows. 

Different Ways for Windows 7 Factory Reset

Here are two different ways in which you can process your factory reset. You just need to perform the methods. 

  • Factory Reset  Windows 7 with an Installation Disc

This is the most useful method. A lot of people go with this one. So let’s get into the steps which would help you to Factory reset windows 7 with the help of a disc:

  • The first step would be to restart your computer. 
  • Then with the help of the F8 key on your keyboard, launch the Advanced boot option
  • Now you would get a lot of options, select Repair your computer from those options
  • Tap on Next
  • Next, click on the system restore option 
  • This will lead you to have your reset doneFactory Reset  Windows 7 with an Installation Disc
  • Windows 7 Factory Reset Without an Install Disc

There is an inbuilt recovery partition for users to perform a factory reset for their devices. You can restore your windows 7 without any external disc and drive through the following steps:

  • Go to the start menu and select control panel
  • Then click on system and security
  • After that select backup and restore
  • This will lead you to the backup and restore page, from this you need to select the recovery system settings.
  • Next, select the advanced recovery methods
  • This would lead you to two different options and you need to select return your computer to factory condition 
  • You need to create a backup task to create a backup which you must do to save your data and files.
  • Lastly, click on the restart button which would reboot your device and let the process of factory reset work. 


If you ever land up in a situation where your device needs some clearance for smooth running then you know what option you need to go. The article above mentioned is everything you need to know about Windows 7 factory reset from its benefits to the different steps involved in the various methods of resetting your windows. 


Q1. What is a factory reset?

A factory reset is removing all the existing data from any device and then restoring it. It will delete all your programs and files along with resetting all those apps that might be on your device and bring your device with a fresh set-up.

Q2. What will happen if I factory reset my laptop windows 7? 

If you factory reset your laptop to windows 7 then all the data from your hard disc will be deleted and everything you had on your laptop be it data, files apps or any other set-up of your laptop would all be reset once you put your device on the factory reset option. 

Q3. How to factory reset Windows 7 HP Laptop?

Following are the steps that you need to follow to factory reset window 7 on an HP Laptop:

Before the resetting process starts, you need to first make a backup of everything that you need to keep saved. As this process of resetting will delete all those things so you might be careful before beginning the process. After that follow the given steps:

  • Go to the start menu and click on the control panel
  • Then select system and security
  • Click on the backup and restore
  • Then click on recovery system settings and select advanced recovery methods
  • At last click on return your computer to factory condition which will complete the process and would direct you to a freshly restored pc.
windows update cannot currently check for updates because the service is not running

Are you also facing a continuous error popping on your device which says “Windows update cannot currently check for updates because the service is not running”? Then you might also be thinking about this issue a lot. What are the reasons behind this error? This is one of those common errors faced by people on their devices. If you too are going through such an issue then you might find this article very useful as it will resolve the mystery of this frequently seen error on Windows updates.

Windows Update not Able to Check for Updates: Basic Overview

Updating Windows and keeping them updated with the latest versions is something that every user needs to do. To keep one’s device running smoothly and not letting it slow down with time, updates are quite necessary. 

But what if your Windows update cannot currently check for updates because the service is not running or due to any other reason? In such a situation a person might be thinking why is my Windows update service not running? The problem of Windows update service, not running is nerve-racking for a person who is a regular user of a PC.

So let’s figure out why such errors occur in our system and what could be done to resolve them. Why is your Windows not checking for updates? Whenever you see Windows update cannot currently check for updates, you might think of the reason behind this error occurring on your device. Many of us think that Windows update cannot currently check for updates because the service is not running. But there could be many other reasons that might be behind the recurring of this error. 

The Reason Behind not Getting Updates on Windows

  • Service not RunningWindows update cannot currently check for updates because the service is not running

This is something that is made a universal reason for this. There is a majority of people who complain that it might be the sole cause of their Windows update cannot currently check for updates. Now if this is the specific problem that you need to cater to for your Windows updater to work back normal then try out any of the below-mentioned solutions.

  • Clearing your Windows Update History

The hoarding of a lot of history on your Windows updater can also be making it difficult for it to access the recent updates. Now you might think of how you can solve this issue of history on the Windows updater. Don’t worry you are all sorted as in the below-given steps you will get to know exactly how you should go on and clear your history:

  • First of all press Windows + R and then on the Run box, you need to type “services. msc”.
  • You would be then provided with a list of services, find the Windows update 
  • Now select Windows update and click on stop.
  • Then navigate to this “{50afa256e6562afb2cd7837d8db3fd71ce947f26b53ffff72a77bb9141ae121a}windir{50afa256e6562afb2cd7837d8db3fd71ce947f26b53ffff72a77bb9141ae121a}\SoftwareDistribution” on the run box 
  • This will lead you to the Software Distribution folder
  • After getting to the folder named as software distribution folder, you need to delete all the files in it  
  • After you are done deleting all the history now you need to restart the Windows update.
  • For that right click on Windows update in the service applet.
  • Then click on start to restart the Windows update services.

And you are all done with clearing the history of your Windows updater. If this was the reason behind your Windows update cannot currently check for updates then most probably the issue will be solved.

  • Use your Troubleshooter 

Sometimes the issue occurs because of some random technical glitch and not resolving with anything you have tried then you might try running your Windows update troubleshooter. Install Windows update troubleshooter on your computer and launch it in your Windows.

  •  Disabling of Third-party Security Software

At times, this third-party security software can be the reason behind such errors. Although it’s not necessary to disable them for long. Just disabling them for a little while must help your Windows updater to run normally. So next time when you face this error of Windows updater not being able to show updates you might try out this way to check if it is this third-party safety software behind it.Disabling of Third-party Security Software

  • Updating your RST Driver

Sometimes it’s your RST driver that is causing you issues. keeping an outdated or defective RST driver can be one careless thing that might give you big trouble as such. So you should manage the frequent updates of your RST.

  • Registration of Windows Update Service

If your Windows update service is not registered properly then this problem may be occurring on your device more frequently. If you need to solve this problem then you have to register it in a systematic way to get rid of that problem. In case you ever encounter such an issue with Windows updates and cannot currently check for Windows updates. This is because the service is not running then make sure to register the Windows update service.Registration of Windows Update Service


Final Say

If you are in trouble with windows update cannot currently check for updates because the service is not running and it is bulging your effort to maintain an up-to-date device then the above-provided information is all you need to know. This is a full guide about why such errors might occur and how you can take care of them. This will allow you to get rid of this problem in the easiest way possible.


1. How long does checking for updates take?

20 to 30 seconds is the average time that it takes to check for an update. But if your device is taking longer than that then your device might be facing some issues. This requires a solution to have this average time of 20 to 30 seconds for checking for updates.

2. Why is your Windows not checking for updates?

Your window not checking for an update is because the service might not be running on your device due to many reasons ranging from the interference of third-party security software or Windows update history or improper registration of Windows updates etc.

Is it Important to Make Bootable USB from ISO?

If you want to create a bootable USB for Windows 10 and are feeling stuck in order to make a bootable USB from iso. So, don’t worry as we have come to assist you. We know how irritating it can be when you need to face issues like a broken window. In contemplation of installing the Windows Operating system or fixing a broken Windows, you need to create a bootable USB Windows 10. Keep up with the blog below for the step-to-step guide on booting from USB windows 10 and getting all the answers to “how to make bootable Pendrive for windows 10 from iso file”.

Is it Important to Make Bootable USB from ISO?

Yes, It is kind of important as ISO can perform booting USB more efficiently. Also, it has gotten more popular over time because of its exceptional features. For instance, its reliability, efficiency, and safety. We would advise you to use USB for this as any other option like CD/DVD would cost high. 

How to Make Bootable Pendrive for windows 10 from ISO File?

When you search “boot from USB windows 10” on the internet you may find thousands of non-working results. But here, You will be getting 2 on-point methods to resolve the issue in a very simplistic manner. Through these methods, you can come out of glitches. You need to have a bootable USB for it. Just go and check the methods which suit you.

Method 1: Windows Media Creation Tool

Windows Media creation tool is one of the efficient tools provided by Microsoft to allow you to install the window which is compatible with your computer. So just follow the steps below to create a bootable USB Windows 10. 

Step 1: 

Go to Windows 10 Download page and click on the download tool now option.

Step 2: 

The tool you have downloaded is an independent tool so you don’t need to install it. Just open the tool and create a bootable USB Windows 10. Accept all the terms and conditions coming to you. how to make bootable Pendrive for windows 10 from iso file

Step 3:

Two options will come up. You need to select “create installation media (USB flash drive, DVD, ISO file) for another device”.

Step 4:

It will ask you about the architecture language and edition. In this phase, you can choose the “ recommendation” option.

Step 5:

In this step, you will be asked about what media you want to use. Here you can choose the former option. Just make sure that if you choose the USB option then your USB must have at least 8GB of capacity. So, simply choose the option and click next.

Step 6:

The tool will start downloading on your USB. Now, you have to wait as it can take a little time. The tool will create Windows 10  media, be patient.

Furthermore, after waiting for a few minutes your USB is ready to boot from USB Windows 10. Don’t forget to click the finish button at last. Here, the process is fully complete now you can use this USB on another computer to install Windows.  how to make bootable Pendrive for windows 10 from iso file

Method 2: Download ISO File and Burn Window ISO to USB

This method is also an easier way to make Windows 10 bootable USB but you must first check your computer for Windows 10 Compatibility. Here are the two things that you need to do to get your issue resolved.

First:- Download Windows 10 ISO File

Similarly, Here you can use a media creation tool in this. When it asks you which media file you wanna use, please select the IOS file. Follow the on-screen wizard and continue with the process.Download ISO File and Burn Window ISO to USB

Second:- Burn Window 10 to USB

You may choose the USB option when you want to boot or you may have used the Rufus to create bootable usb windows 10 as it is an easy-to-use and convenient option available to you. You can simply follow these steps further to burn Windows 10 to USB.

  1. Goto Rufus’s official website and download “ USB bootable software free download for all Windows”
  2. Run this ISO to the USB burning tool. This tool automatically detects your USB.
  3. You need to click on the select button and click to start. Before that, You need to specify the volume label and partition scheme.
  4. This tool will start to burn. You need to wait for a few minutes. When the status is ready click close. Finally, you are done with the process.

Last Lines

All in all, We have provided you with the best insight available and believe you got all your answers to “how to make bootable Pendrive for windows 10 from iso file”. Lastly, we are hoping that your problem has been resolved with the above-mentioned methods. If you are still stuck with the issue then you may contact us below in the comment section. We will definitely be reaching out to assist you in every possible way.


Q1. How do I make a bootable USB from an ISO file?

Ans- Download the Rufus tool> open it> Select ISO image> choose standard Windows installation and start the process.

Q2. How to make a boot disk?

Ans- You can create a boot disk with simple steps. Here we are enlisting some for you.

  1. Goto application home select disaster recovery.
  2. Select boot media type.
  3. Create your bootable image.

Q3. How do I convert ISO to USB with Rufus?

  1. Open Rufus and plug in your clean USB.
  2. Click on the Device and select the USB.
  3. Make sure the boot selection option is set to USB then click Select.

Q4. Can I copy the ISO file to a USB?

Ans- Yes, You can. It is a very easy process. You can transfer any ISO media to a USB. Either it’s the Operating system, Game ROS files, etc.

How To Reinstall Windows 10 Without CD

Reinstalling Windows 10 may be desirable for a wide range of reasons. There are several reasons why someone would need to do a fresh installation of the operational system, spanning from a general perception of sluggish performance to addressing software bugs that cannot be properly diagnosed to even removing content like ransomware, spyware, or bloatware. Nevertheless, it is not really one of the more well-known powers, and individuals who are acquainted with it constantly find it daunting. People frequently don’t want to take the chance of damaging vital documents, coursework, or family portrait albums that also are saved digitally due to a large amount of private and sensitive material on the computer.

In this article, let’s dig in to know all about “how to reinstall Windows 10”.

How To Reinstall Windows 10 (What Should You Know?)

There is also a program that can install the operating system from scratch while retaining your information and preferences for only certain settings. Additionally, if you’re slightly behind on software updates, this ensures that Windows 10 would be updated for you instantly. The length of this explanation will vary depending on the hardware you’re using, as it does with many other installation guides. Reinstalling Windows 10 will go considerably more quickly on an SSD than a mechanical hard drive. It will take a while if your internet connection is extremely slow because you’ll be downloading the latest software. 

Note: Be just conscious that you won’t use your device for a certain time after the installation process starts; your Computer might be unavailable for a maximum of two hours.

How To Reinstall Windows 10? 

Reinstalling the system may be done in three distinct ways. Depending on your objectives, you can choose any strategies below.

reinstall windows10

Method 1: Reinstall Windows 10 with Reset PC Feature

To assist you in resolving computer system problems by restoring your computer to its default configuration, Windows 10 provides the “Reset this PC” feature. You have the ability to maintain your classified information throughout the process and carry out a successful factory reset Windows 10.

  1. Open Reset this computer by powering it up.
  • Navigate to Settings > Update & Security > Recovery > Reset this PC and choose Get Started under the reset this PC option if the computer is still operational.

Reinstall Windows 10 with Reset PC Feature

  • In that case, you may create a recovery drive, boot from it, specify your language of choice and other options, and afterward click Next > Repair your computer > Troubleshoot > Reset this PC.
  1. Choose the first of the two options available after clicking Reset this PC: “Keep my files” or “Remove everything”. Apps and settings will be removed, but your private information will remain unchanged.
  2. Following that, it will inform you of every amendment made during the operation in the Ready to reset this PC window. Click Reset after you have validated it. The command line is another method for resetting Windows 10.
  • In the search box, enter “cmd” and then click OK.
  • Choose “Run as Administrator” from the context menu when you right-click the Command Prompt in the results list.
  • Inside the command window, enter “system reset” without the quotes, then press Enter. Run the command “system reset – cleanpc” if you need to install Windows 10 and latest updates.

Method 2: Install Windows 10 without Data Loss

You can opt to update Windows 10 using this technique if you prefer installing Windows 10 without losing data from a USB device or installation disc. Here is how to reinstall Windows 10 without losing data.

reinstall windows10 without losing data

  • Boot from your installation disc after inserting it. You could construct one if you don’t already have a copy by downloading the Windows Media Creation program.
  • Choose the keyboard and language, then click “Next.”
  • Press “Install Now.”
  • Enter your product key or omit this step. If you install the very same Windows 10 version as before, your computer will often activate automatically when it’s linked to the network.
  • Pick “Custom” as the installation type.
  • Simply choose the C: drive and press Next to move on at the following screen. Then, patiently wait until the installation is 100{50afa256e6562afb2cd7837d8db3fd71ce947f26b53ffff72a77bb9141ae121a} complete.

In the current directory of the C: disc, you can see a folder named Windows.old after the installation. There are backup copies of all of your files. Just in case, you feel this as a technical procedure, it is advisable to upgrade to windows 11.

Method 3: Erasing any Data Approach

Use this approach to reinstall Windows 10 without wiping the data if you are confident that installed programs are functioning properly. 

  • Utilize the Windows Media Creation tool to build an installation ISO file by downloading it from
  • Double-click the ISO file to mount it for Windows 7, you need to use other tools to mount it. To launch the Setup.exe file, double-click it in the root directory.
  • You may decide whether it should install updates or not once Windows 10 Setup is complete based on your requirements.
  • Click the “Change what to keep” button on the What requires your attention screen.

Click the Change what to keep button

  • Then have three options on the Choose What to Keep screen: “Keep personal data, programs, and Windows settings,” “Keep personal files alone,” or “Nothing.” Select Option 1 and then click Next.
  • Click Refresh to bring up what requires your focus screen and confirm your selection.


So, there you have it! Our guide on How To Reinstall Windows 10 Without CD”. Hoping that you got your answer on reinstalling Windows 10. We believe that the above methods will definitely help you out. If you are still facing issues, kindly let us know in the comments below.  We are always available for you 24×7.


Q1: How to Reimage Windows 10?

Ans: Go to the Windows logo, previously known as the “Start” button, in the bottom left corner of screen, type “Reset This PC” into the search field. Navigate to the “Recovery” tab on the left of the screen. To begin, select the “Get Started” option beside “Reset this PC.”

PXE Boot

You can attempt to start your Computer in Preboot Execution Environment (PXE) configuration if you desire to possess additional client PCs launched using a similar connection or preserve several machines interconnected across LAN. Understand what PXE entails and how PXE booting operates before proceeding to it. In this article, we have forwarded to you the whole information on “PXE boot”, which will further help you out.

What is PXE Boot?

What is PXE Boot

Preboot execution environment provides remote computer booting over a network connection, often known as “Pixie”. Independent of its hard drives and installed operating system. PXE enables a client computer to boot from a server. PXE was created by the renowned “Intel” as a part of the Wired for Management (WfM) platform. Although Active Management Technology has now overtaken Intel’s System that can support it, many system administrators still consider PXE to be an effective instrument. 

Typically, clients centrally administered computers and routers perform network bootstrapping in diskless situations. Increased security, lower operating costs, and more command over the program’s terminals are all advantages of consolidated computing environments.

To enable independent boot and setup, PXE code comes with computer hardware on a Memory chip or a bootable drive. Various network protocols are used during the operation, notably  Trivial File Transfer Protocol (TFTP), User Datagram Protocol (UDP), and Dynamic Host Configuration Protocol (DHCP).

What are the Advantages of PXE Boot?

Here, we are now going to discuss its advantages and also determine when to utilize it on your device. 

  • The client device can be restarted in the instance of a software or hardware malfunction. As a result of automation, there’s going to be less potential for error and administration will be able to identify and perhaps solve issues.
  • Given that it is vendor-independent, introducing more computers to the network is simple. Its use can cut down on the amount of effort spent on each server, and the deployment tools are consolidated and simple to upgrade.
  • System software as well as a hard disk is not essential for the client computer.

How Does PXE Boot Operate?

Well, this is where you will come to know how “pixie boot” operates. Prior to the PXE network booting, you must first establish the Dynamic Host Configuration Protocol/scope Parameters 66 and 67. After the client computer’s IP address being provided, the boot process commences.

PXE Boot Operation

Installation of DHCP

  • Here, a “discover” signal requesting for network configuration is transmitted by the client computer as a broadcast. This packet will reach the DHCP server.
  • Secondly, to the client, the DHCP server will broadcast an “offer” signal. The client will get the network configuration, such as an IP address and subnet mask after the packet has been inspected.

Now, come to the PXE boot process

  • At first, the user will notify DHCP that it is leveraging a PXE server and the server will transmit the startup file name Option 67 and the IP address of the next bootable server to the user.
  • To obtain a boot file, the user will communicate to the server. The client will get the starting file through TFTP from the PXE server (TFTP).
  • Hence, settings 66 and 67 can be set up under range or server options on the DHCP server. The starting files for client PCs are loaded and started as a consequence.

How can you Conduct a PXE Boot?

Here, we are forwarding two methods by which you can perform a Preboot execution boot on Windows. 

Method 1: Execute Windows 10 PXE Boot with no Software

To perform this method, you need to follow the steps very carefully:

Aptio Setup Utility

  • Check to see whether the DHCP server and the TFTP server are accessible such that the PXE network environment is properly configured and enter BIOS after that.
  • Afterward, ensure it is permitted. In order to open the Aptio Setup Utility, press the F2 key. Next, choose Advanced from the top menu bar, followed by Network Stack.
  • After a server reset, the BIOS window will reappear. If you want to network boot, hit the F12 key instead of the F8 key.
  • Within the Please Select Boot Device menu, you’ll find a table of the potential boot devices, then Press “after selecting its interface.“ Next, apply the on-screen directions to finish the PXE installation.
  • Lastly, carry out the post-installation actions as directed by your operating system.

Method 2: PXE Boot Windows 10 via MiniTool ShadowMaker

Follow the steps below to perform this method:

PXE Boot Windows 10 via MiniTool ShadowMaker

  • Activate MiniTool ShadowMaker then to access its primary interface, select Keep Trial and then select Connect in This Computer.
  • Next, go to the Tools menu and choose the PXE section. For the PXE service to launch, click the Start button. The MiniTool PXE Boot utility will automatically establish the necessary DHCP settings. Before clicking Start, you may adjust the parameters by clicking Settings.
  • It launches the client PC connection service. It might need a bit of patience. All you have to do is wait quietly.
  • You may configure the client PCs to start from the net in BIOS when the Connecting to the server notification appears and may easily maintain hard discs on a large number of customers if all client PCs boot from the PXE network.


Our guide wraps up here with our detailed analysis of the Preboot execution environment. We hope that you got the major information on “PXE Boot”. We believe that the above methods will definitely help you in the future. For any further assistance or other related queries, kindly let us know in the comments below.  We are happy to help anytime anywhere.


Q1: What does pxe boot stand for?

Ans: PXE boot stands for “Preboot execution environment”.

Q2: Where in a system do you configure pxe?

Ans: To configure pxe in the system, visit Software Library > Operating Systems > Boot Images > Boot Image (x86), right-click, select Distribute Content, then choose to Add the Boot Image to the PXE-equipped DP. For the Boot Image, repeat these steps (x64).

continuous data protection

Continuous Data Protection is one of the important things that you should know. A disruption or data theft can utterly damage a company. As business users now rely on data more than ever. you must retrieve the business-critical data of your clients as quickly as possible. Considering data loss can occur at any moment. Your most recent backup of their data will determine how fast things return to normal. They risk having a negative impact on their employee’s performance and the strategic and long viability. If they don’t have comprehensive data protection this can delay them by numerous hours, days, and maybe even weeks.

Therefore, this article is for you. We are here with all the information you really need to be aware of “continuous data protection”. continuous data protection

Continuous Data Protection: Overview

Continuous Data Protection (CDP), is the mechanism of backing up data on a computer system each time a change occurs. A system can restore to any earlier time point thanks to CDP, which keeps a running diary of data changes. Consequently, the “backup window” issue, in which businesses run the danger of losing data produced in between two scheduled backups, is resolved. 

Additionally, it offers a strong defense against dangers like ransomware and malware, as well as against sabotage and unintentional data loss.

Understanding the Distinction Among True CDP and Near-CDP

True CDP –

True CDP is an ongoing incremental capturing procedure.  There is no data loss with true CDP. Since its recovery point objective (RPO) is relatively near zero.

Near-CDP –

As the name suggests, a near-continuous process (near-CDP) is one in which a predetermined time interval is set aside for taking data snapshots. Depending on how frequently you take snapshots, Near-CDP determines an RPO, typically one hour.continuous data protection

How does Continuous Data Protection Perform?

Any alterations to the source data are copied to a different focus via continuous data protection (CDP). The destination disc should connect with the same network as the origin, making it possible for you to swiftly retrieve any lost user information. Although off-site replication, in which the target disc is not connected to the same network, gives excellent safety, it also causes a higher delay. Continuous backup solutions may periodically permit duplication to two positions: one on-premises for immediate recovery as well as another off-site for emergency preparedness.

However, data types in CDP Numerous varieties of information can be constantly backed up and modified even when being recorded. They are –

messages, messages in mailboxes, file databases, Data and files used by applications, and a database’s logs.

Advantages and Disadvantages of CDP Backup

Companies may accomplish safe data storage with the Windows Startup folder, data files & other relevant locations. leveraging the potent concept of continuous data protection. There are a number of operational difficulties. Here, we will discuss the advantages and disadvantages of “continuous data protection technology’’.CDP Backup

Advantages –

  • Version control—continuous data protection maintains numerous versions of every file, allowing the makers and consumers of the data to revert to earlier versions.
  • A catastrophe recovery strategy must include ongoing data security as a key element. A remote server farm can get regular replications of the CDP backup storage, for instance.
  • It maintains a record of every data transaction; this is crucial for auditing and compliance as well as forensics in the event of security events.

Disadvantages –

  • Fast disc drives are necessary for disk-based continuous data protection technology. This may need a substantial investment in physical disc storage.
  • Single point of failure: If you don’t have high data availability in place, a CDP server could become a weak point for the whole company.
  • Usually, We can see an increase in the demand for data resources. It is because of the fact that every data transaction should instantly store in a backup. This essentially doubles data throughput. CDP may cause stability or performance problems since the vital resources it will safeguard are frequently under heavy stress.

Snapshots Vs. Continuous Data Protection

True CDP lacks backup schedules in comparison to snapshots. Data is asynchronously transferred to a backup location such as another computer connected to the Internet or a cloud appliance as well as to the disc. 

Disk-write may experience some inconvenience as a result, but the scheduling of backups is no longer in use. Data restoration at any point in time is possible. However, adjacent CDP technologies can provide sufficient security for several enterprises with less effort and price.

Closing Lines 

We hope that you got the maximum information on “continuous data protection software”. We believe that the article will definitely help you out whenever necessary. If you are still confused or have any issues, you can always get back to us. We are available 24×7.

Frequently Asked Questions:

Q1: What does CDP mean?

Ans: Continuous Data Protection (CDP), generally known as a continuous backup. It means a mechanism of backing up data on a computer system each time a change occurs. A system can restore at any point in time. Thanks to CDP, which keeps a running diary of data changes. 

Q2: What type of backup solution is a point-in-time, read-only copy of data?

Ans: Snapshot is the type of backup solution that is a point-in-time, read-only copy of data. However, in some data files and with virtual computers, it is not working.

Windows 10 Startup Folder

While launching Windows 8, Microsoft decided to do away with the Start Menu and it got eliminated from the list. Because Microsoft wanted its users from the automatic way of execution of programs and applications. Basically, Microsoft wanted its user to be free from a batch script called autoexec.bat i.e. move away from a scripted and command-line environment as the previous version sometimes required when it was booted. That’s why it introduced the Windows 10 startup folder yet invisible, unlike its previous version. You can access and operate it in a different manner; functions are still operational, some even updated.

Windows 10 startup folder is a unique specification or folder in itself because it runs your favorite programs automatically, prompted under your control. Hence, if you are looking to learn to use the windows startup folder sophisticatedly so that your productivity increases, even more, you should not ignore the given below explanation and a resourceful guide.

A Little Bit More Understanding of Windows 10 Startup Folder

Accessing Windows 10 startup folder

As mentioned above, the Windows startup folder is a special and unique folder on your machine (PCs or laptops) that will run your favorite programs or any automatically. If you are using Windows 10, you would keep your programs inside your Win 10 startup folder. It will run on its own when you start your machine, saving the loading time of the programs and the applications.


Accessing Windows 10 OS startup folder: Where it is?

As for its location, Windows 10 startup folder has two locations: One functions at the system level giving access to all the user accounts called the All Users folder, and the other works at the user level specific and unique to the user account called Current User Folder. You can also call the current user folder Personal User/Startup Folder.

It is important to understand the difference between All User Folder and the Current User Folder. Based on the understanding, you will be able to resolve the issues and glitches if encountered.

You can access the Startup Folder Windows 10 in different ways.

Access Windows 10 Startup Folder Using Command Prompt

  • Step #1  – You can press ‘Windows+R’ to open the Command Dialog.

shell Startup

  • Step #2 – Now, on the dialog box, type ‘shell:Startup’ to access the personal Startup folder. In order to access the Startup folder for all users, you can type ‘shell:common startup’. Then hit the Enter key.
  • Step #3 – All the Startup programs listed in the Startup folder show up.

Access Windows 10 Startup Folder Using File Explorer

You can use the below steps to access the Windows 10 Startup Folder depending on the user-specific, personal, or all.

Access Windows 10 Startup Folder Using File Explorer

For personal users:

  • Step #1 – Please open the ‘File Explorer’
  • Step#2-Please use this path ‘C:\Users\[User Name]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup’ and enter in the given path for ‘File Explorer’

For all and shared users:

  • Step #1 – Open the File Explorer again
  • Step #2 – You need to enter the following path and press Enter to find the Startup folder for all users: Path: ‘C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup’

Note: Locating the Startup folder using File Explorer, it is mandatory for you to enable the ‘Show the hidden files, folders, and driver and apps’ option.

Follow these steps in case you miss out.

1-  Open the File Explorer Options

2-  Find and click on ‘View’ to find Show hidden files, folders, and drives in Advanced settings and select it.

3-  After that, click on ‘OK’

It is not only a shortcut to your programs, files, and applications but also a time saver to the loading time required for them to appear on your PCs while your OS boots up. This is how you will be able to save the major chunk of time required for your programs to load.

One important disadvantage is that when increasing the number of additional programs to the Windows startup folder, boot time might get a little slower. In that case, it is better for you to remove the unnecessary programs from the startup folder Windows 10.

Adding Programs to Windows 10 Startup Folder

Adding any programs to your Windows 10 startup folder is easy.

Adding Programs to Windows 10 Startup Folder

  • Step #1 – Once you have located the file, right-click on the program you’d like to add. Then click on Create Shortcut, this will create a shortcut for your program.
  • Step #2 – Now, press ‘Windows+R’ simultaneously to launch the dialog box, type ‘shell:startup’, and then press Enter. This will open your personal Windows 10 startup folder
  • Step #3 – After selecting the program to be added, press ‘Ctrl+C’ and press ‘Ctrl+V’ to paste the created Startup folder.

Disabling Programs in Windows 10 Startup Folder

If you feel you do not want any particular program to automatically run, you can disable them or any using the three ways mentioned in the following manner:

1: Using Task Manager

Task Manager

Step #1 – Launch the Task Manager by pressing ‘Ctrl+Shift+Esc’, click the Startup and find your program to delete.

Step #2 – The startup inside the Task Manager will show up on the list of programs. You can select the one you wish to disable. Select the program and right-click on it and click Disable to stop or disable.

2: Using Command Script

  • Step #1 – Launch the Run window by pressing ‘Windows+R’ and then type ‘shell:startup’. This will reflect all Startup programs.
  • Step #2 – Select your program to remove or delete and then click on Delete.

3: Using App Management

Using App Management

  • Step #1 – Launch ‘Startup tasks’ in the Windows search box or Cortona and press Enter. It will show up on the list of the program interface.
  • Step #2 – Select the one you want to disable and click Turn off.

Programs to Add and Disable to and from Windows 10 Startup Folder

Most importantly, you will add your frequently used-favorite files and programs to Windows 10 Startup Folder. You will also add the ones which run fast and appear on your system.

Based on your needs you will take the following precautions while adding the programs:

1- You will add antivirus software to avoid viruses and cyber-attacks. You have it running all day while you working on your PCs.

2- It is quite alarming to lose data, it is essential that you launch and add Cloud Storage software to Windows startup folder to store the back file there.

However, you will not add the following programs such as gaming software and large-scale software as they will slow down the boot time.



Having a Windows 10 startup folder is a good practice as it reduces the loading time for programs and it also creates shortcuts. There are major ways by which you can manage your programs and maximize your productivity. You would need to keep in mind that you should not keep or put any programs that would take a longer time to load on.

Frequently Asked Questions

Q1. How to make a program run on startup windows 10?

You can use these steps:

1- Find the app to run on Startup Windows 10

2- Right click on it, select more and select Open file location.

3- Having the file location open, press Windows+R, type ‘shell:Startup’, and then hit OK.

Q2. How to remove a program from start-up?

There are three ways:

1: Task Manager

2: Using Command Script

3: From App Management

Q3. How to add a program to startup in Windows 10?

You can use the below-mentioned steps:

  • Step #1 – Once you have located the file, right-click on the program you’d like to add. Then click on Create Shortcut, this will create a shortcut for your program.
  • Step #2 – Now, press ‘Windows+R’ simultaneously to launch the dialog box, type ‘shell:startup’ and then press Enter. This will open your personal Windows 10 startup folder
  • Step #3 – After selecting the program to be added, press ‘Ctrl+C’ and press ‘Ctrl+V’ to paste the created Startup folder.
how to transfer files from old pc to new pc windows 10

Whenever you get a new device there is this excitement to just use it straight away. But sometimes this excitement is barged in by the problem of transferring data from one system to another. People are always confused with the query of how to transfer data from one computer to another. However, this can be done easily and in numerous ways. All those different ways you can transfer files from PC to PC are given below. So keep going further in the article to get to know in depth about how to transfer files from old PC to new PC Windows 10 and enjoy your device after the easiest transfer is done.

Different Ways to Transfer Files from Old PC to New PC Windows 10

1. How to Transfer Files from PC to PC with Cloud Storage

Transfer Files from PC to PC with Cloud Storage

The use of cloud storage like OneDrive, Dropbox and Google Drive can be used to transfer files from one PC to another and even more than that. With having all your data in these cloud storage you can migrate to multiple devices without any problem. So, if you too are stuck with the thought of how to transfer files from old pc to new pc windows 10, then follow the given steps and make cloud storage your tool to transfer files from PC to PC:

  • Open OneDrive or any such cloud space and add your files.
  • Now on the device on which you want your files, open the same cloud space and access your account on that device.
  • Select download and this could give you all your files in your new windows.

2. Use a USB Transfer Cable

The best way to transfer your files from your old PC to a new one would be using a USB transfer cable. This would be the most direct way to transfer your files from one device to another. You just need to connect both devices with the USB cable and run the transfer of the files on your devices. These easy steps will guide you on how to transfer files from pc to pc with the help of a USB cable:

Use a USB Transfer Cable

  • Turn on both devices and attach your USB cable to both.
  • Now click on “Start”
  • Now search for window easy transfer.
  • After this, the prompts of the easy transfer wizard would continue the further transfer. 

3. Transfer Files using a Backup and Restore Tool

Often we are stuck with the issue of transferring files from our old device to the new one and this might cause a lot of trouble in our life. In such situations of how to transfer files from old pc to the new PC windows10, the thing that might help you is transferring files using a backup and restore tool.  One such tool is EaseUS Todo Backup. This tool eases your backing up process.

EaseUS Todo Backup

  • The first step in the process would be the backup process.
  • To begin, you have to click on the “Select backup contents” button.
  • You would now get an option of four different categories for different types of files
  • Now you need to choose the files you need to backup.
  • There would be instructions on your screen about where you want your backups to be stored.
  • Click on “Backup now” this will allow you to start the backup process.
  • After the backup process, attach your external device to the system.
  • Then run the EaseUS Todo Backup and restore all the backups.
  • Now you can easily transfer your files to other devices.

4. File Transfer Through Manual Copy on External Media

The most convenient way to transfer files from your old PC to a new one is with the help of external storage devices as they do not require any internet access or additional software involved. If you just need to transfer files then this might be the best possible way but it might not be possible to transfer the applications for you can go for the other steps. Let’s have a look at the steps to transfer files with the help of external media:

File Transfer Through Manual Copy on External Media

  • Firstly connect your external media with your old PC.
  • Copy all the files you need on the external device and move them to the new PC.
  • And here you are simply with two steps and all done with the file transfer.

All in all, these all are the best way to transfer files from PC to PC with ease. Follow them carefully to get the best out of your transfer process.



Are you also transferring your data from an old device to a new one and are stuck with the thought of how to transfer files from old pc to new pc windows 10? But with the above-mentioned detailed information, you can easily do this transfer of files. We have curated this article to make transferring data an easy and simple task.

Frequently Asked Questions

1. How to transfer data to a new computer?

When you bring in a new device, you need to transfer all the data to it from your old device. There are a lot of ways to transfer your data which include backup and restore, cloud storage, USB cables, external device transfer etc.

2 . How to transfer data from one computer to another?

To transfer everything from one computer to another, you can make a backup of your old computer and then restore it to the new computer. Use the backup and restore facilities provided by some software or from any other external transfer of files.

3. How to transfer from PC to PC?

If you want to transfer data from a PC to a PC then you can do it by the following means:

  • Transfer through cloud storage
  • Use external storage devices
  • Use data transferring software 
how to upgrade to windows 11

How to upgrade to Windows 11? Having a PC is something that needs a lot of maintenance or it would just not be a smooth-running device. The main thing that needs to be well upgraded is your operating system as this would not only make your device up to date but allow you to experience the newest features. There has been the recent launch of Windows 11 which made a lot of buzz for the new features it has to offer to the users of the tech world. Are you too a regular user of a device that has its operating system still running as Windows 10?

It’s time to make a change to your device and upgrade from Windows 10 to Windows 11. Now you can look for the Win 10 upgrades in many ways which need different steps to be followed. Are you also in need of upgrading your operating system but worried about the thought that, how to upgrade windows 10 to 11? Then you are in the right place. This article below explains all the ways to upgrade your windows in simple and easy steps.

New Features of Windows 11 

Before solving the question “how to upgrade to Windows 11?” You should have a basic idea of what are the new features you are getting with this upgrade. Let’s have a look at all the new features that Windows 11 provides you:

New Features of Windows 11 

  • Integrated Android Apps

One of the most awaited features that have now finally made it to Windows is the support for Android apps which is going to make it even more convenient for the users now to access all the Android apps in Windows. 

  • Multiple Virtual Desktops

You can now very easily manage multiple desktops on your device and multi-task according to your work. This feature is very much it for people with extreme load and who tend to do a lot of intricate multitasking on their devices. 

  • Convenient Transition from Monitor to Laptop

Windows 11 allows the user to make a quick transition between switching it from a monitor to a laptop which was quite a task to do but with this newly added feature it is now an easy task that the user can easily handle. 

  • Xbox Tech for your Improved Gaming

Windows 11 also has a feature that improves gaming features on your device. It makes your gaming experience better than ever in its new updated version. 

  • Improved Performance

The overall performance of the operating system is improved with this new update and it makes it better than the previous one as it removes all the failings faced in the previous one. 

As you are now through with the advanced feature that want you to get all the answers to: How to Upgrade Windows 10 to 11 ? We have a detailed analysis below.


Is Your Device Compatible with Windows 11? 

Before installing Windows 11 on your device, you should make sure whether your device is compatible with running this new upgraded version of Windows. For that you much check for the following eligibility criteria:

Device Compatible with Windows 11

  • Your PC must have a processor that is 1GHz along with 2 cores on a compatible 64-bit processor or system on an (SoC) chip. 
  • It should have a memory of 4GB (RAM) and a storage of 64GB or more. 
  • A graphic card working with DirectX 12 Or driver WDDM 2.0. 
  • A high-definition display. 
  • Reliable internet connection and a Microsoft account. 

These are all the criteria that your device needs to fulfill to operate with Windows 11.

Different Ways to Upgrade Windows 

1. Upgrade using ISO File

To upgrade your Windows with the use of an ISO file, follow the given steps:

Upgrade using ISO File

  • Go to the website of Microsoft Support 
  • Now go on the option under the “Download Windows 11 disk ISO”
  • Select the” Windows 11” option.
  • Next click on the “Download” option and after that select your installation language.
  • To save the ISO file in your system click on the option “Download”
  • Now give a right click to the ISO file and open with “Windows Explorer”
  • Now give the mounted drive a left navigation pane & tap on the “Setup”.
  • Next click on the “change how windows setup downloads update” option.
  • Then select the option “ Not right now” & hit the “ Next” button at the bottom.
  • After that accept the terms and conditions.
  • Now click on “Install “ and get your Windows upgraded.

After you follow all the above-mentioned steps, you will be able to have your Windows upgraded. 

2. Upgrade using Windows Update

After the launch of the new Windows, after some time you will be able to make the update manually to the new version. Follow the given steps to update your Windows 10 to 11:

Windows Update

  • First of all, go to your “Settings” option.
  • Now go for the “update and security”
  • Now click on the “Windows Update”.
  • Then go on the “Download and Install” button
  • Now click on the “Restart Now “ button.

After all these steps you are all set with the upgrading of your windows. This will ease your query on how to upgrade to windows 11  be solved in the easiest process ever

3. Upgrade using Installation Assistant

Are you also struggling with the thought of how to upgrade windows 10 to 11? Here is your answer to upgrading your Windows to Windows 11 with the help of Installation Assistant. Let’s have a look at the steps to install the upgraded Windows:

Upgrade using Installation Assistant

  • The first step would be to open the “Microsoft Support”
  • Find the “ Windows 11 installation assistant” section.
  • Next click the Download Now button.
  • After that, you have to click on the Windows 11 installation assistant.exe file.
  • Now click on the “Accept and Install”

After all these steps your device will upgrade and after upgrading it will be updated to the new upgraded operating system.



Now whenever you have the question of “how to upgrade to Windows 11”, just get through the above article and get your Windows up to date. This will provide you with enormous advantages and some of the latest features offered by it. We have mentioned different ways to suit different methods. All in all, whichever may work for you, pick that up and follow the steps to get your Windows upgraded and enjoy your freshly up-to-date device. 


1. Can I upgrade to Windows 10?

Windows 10 can still be upgraded for free. Fortunately, there are several alternatives to paying the $139 fee for Windows 10 Home if you are upgrading from an earlier version of Windows (Windows 7, Windows 8, Windows 8.1).

2. When can I upgrade to Windows 11? 

If you want to update your Windows to Windows 11 the right time to do it would be when your system notifies you that your device is ready for the upgrade and you should then go for your Windows upgrade. 

windows 10 recovery USB

If your PC is unbootable and you want to create a Windows 10 recovery USB. So, you don’t have to worry now because we have arrived to assist you in every possible way. We are enlisting two ways for you to create a  windows recovery USB. You also can do it with the Media Creation Tool. Go through the article to get your questions answered. 

Can You Create a Windows 10 Recovery Disk from Another Computer? 

Yes, Surely you can. Though, It’s a really good idea. If you are having an issue booting up your Windows then you can reinstall Windows 10 with a recovery disk. Also, you can troubleshoot the error. You can use any of the ways like CD/DVD. But we would like to advise you to do it with USB as it is more convenient and portable. Well, the question here arises is how to create Windows 10 recovery USB from another computer. So, here are the steps to do so.

Windows 10 Recovery USB

How to Create a Recovery Drive in Windows 10? (Method 1)

You can easily create a recovery drive for Windows 10 with easy steps. If your system is not supporting you to do so then you can try it from another system. After that, you’ll be able to restore your unbootable system.

  1. Plug in the USB 
  2. Open the search bar then type out “create a recovery drive”.
  3. Click next to continue and select the USB drive
  4. Click “create” to start the creation process. 

How Can You Restore Your System?

Here’s the guide in which you will be getting that how one should restore the system from the drive that is created on another computer. So you just follow the steps below for Windows 10 recovery USB. Also, it is important for you to note here that you should follow the on-screen instructions and base your choices on your actual situation.

  1. Plug the drive and restart the device.
  2. Enter in the BIOS menu. Change the BIOS setting.
  3. Click on the install button option and start installing.

How to Use a Media Creation Tool?How to Use a Media Creation Tool?

This Tool is provided by Microsoft and also allows you to create installation media. It is a very good option to create a windows 10 recovery USB. Before you start with the process first you need to make sure that no important file is saved to your USB as creation can delete all the items. So, now we have enlisted a few steps below for you to get your Windows 10 repair USB.

Step 1

Open the website to Download Windows 10 and tap on the ‘Download Tool now.’

Step 2

Double-click on the executable file. Also, accepts all the terms and conditions.

Step 3

You’ll come up with two options. Select the second option which says “ Create installation media for another PC”

Step 4

Select a language, architecture, and edition option.

Step 5

Choose the option USB flash drive. Now, the tool will start downloading.

Downloading can take some time so you need to be patient for some time. After a few minutes, the download will be finished. Now, you can click to finish.

What to Do to Restore The Crashed System?Windows 10 Recovery Disk

If you had crashed your system and also made the recovery from another computer then you are in the right direction. As of now, you just need to keep up with these troubleshooting steps.

  1. Troubleshoot
  2. Recover it from the drive
  3. Choose the option coming to your screen “Remove my files”
  4. And, follow the on-screen instructions.

Universal Restore Feature (Method 2)

Alternatives are always there to give you back in the worst conditions like the one you are in. So, the alternative idea is “Mini Tool Shadow Maker”. This is not a prominent way to resolve the issue but it could be a good way to help you out. This tool can help you out with problems like Windows 10 recovery USB. Here we are enlisting a few steps to assist you.

Step 1 {System image}

You need to make a system image of Windows 10. Here first, download the tool called “Mini Tool Shadow Maker” on a working computer. Click on create a backup option and select the destination.

Step 2 {Booting}

In this step, you need to create a bootable drive. Open the tool and go to the tool page. Get started with Media builder (based on Winpe) and select your USB.

Windows 10 Recovery Disk

Step 3 {Restore} 

This step starts with the recovery of the USB drive to restore Windows 10. Goto Restore Page. Select a backup option to continue. Start the image recovery option and wait for a few seconds. Here is one thing you need to keep in mind that is to make sure that MBR and Track 0 are checked. So that the operation can be successful. 

Step 4 {Universal restore}

Now, you need to perform the universal restore. Click on the tool interface then select universal restore. A dialogue box will show a click to restore option to resolve the compatibility issue.



In a nutshell, we have provided you with a full-fledged guide to assist you with problems like Windows 10 recovery USB. To be on the safer boat, you need to back up your computer regularly and restore it when it crashes. We hope that your issue has been resolved after using any of the methods listed above. If you are still struggling then you can contact us anytime in the comment section below. We are always ready to assist you. 


Q1. How Do You Create a USB Recovery Drive?

Search for a recovery drive in the search bar> let the tool open> plug-in USB> select create.

Q2. How to Make a Recovery Disk in Windows 10?

Open your search box> search for a recovery drive> select the recovery files> connect a USB> click on next> select create.

how to stop windows 10 update

Many applauded Microsoft’s initiative to release upgrades on a constant schedule for Windows 10 devices as the corporation was not recognized for this practice. Presently, it seems that the acclaimed attribute has transformed into a discomfort. The user productivity is impacted by the increased incidence of updates and the recurring installation notifications. Moreover, Windows 10 periodically commences installing automatic updates, that only makes the situation tougher for users.

In this article, we are forwarding to you some ways on “how to stop windows 10 update”, which will help you if you frequently stumble across the same barrier.

The Automatic Update Dilemma with Windows 10

The fact that Windows always offers certain updates is a frequent complaint among modern digital users. Furthermore, they are curious to find out if there is a way to permanently disable Windows 10 upgrade as it could lead to other issues like data loss, for illustration, might happen with a Windows update or the 0x800F0830-0x20003 error prevents a Windows update from being correctly deployed. But, you are not far from the solutions to fix this specific issue. Keep reading. 

How To Stop Windows 10 Update?

Well, there are a couple of ways that can help you “turn off automatic updates Windows 10 with ease.

how to stop windows 10 update


Method 1: Turn off Windows Update Tasks

You can attempt to disable Windows Update Tasks in Task Scheduler in order to “how to stop Windows 10 Update”. Hence, follow the instructions below:

Step 1: Check Task Scheduler for Windows Update Information
  • First, choose the most suitable result after typing “Task Scheduler” into the Windows search box.
  • Next, to access the Task Scheduler’s primary interface, launch it.
  • Therefore, the following route should be performed to reach the Windows Update folder: Microsoft > Windows > Windows Update is available in the Task Scheduler Library.

Check Task Scheduler for Windows Update Information

Step 2: Turn off the Windows Update
  • The Scheduled Start button is located in the right panel hence, right-click on it.
  • Secondly, choose Disable to proceed.

Therefore, the Windows 10 update has now been successfully halted, and you may now dismiss the Task Scheduler window.

Method 2: For 7 Days | Disable Windows Update

This method will illustrate how to block Windows updates in Windows 10 by suspending them for 35 days. In that case, you may use this technique to immediately block Windows 10 update.

Step 1: Open the Update & Security on your Device
  • First, to proceed, Windows 10 users should right-click the Start button and select Settings.
  • Next, select Update & Security to continue from the pop-up window.

Update & Security

Step 2: Suspend Windows Update for 7 Days
  • Here, to proceed, find Windows Update in the pop-up window’s left column and select Advanced Options from the option in the right corner of the screen.
  • Please locate and activate the button underneath the section titled “Pause Updates” in the popup window.

Having followed that, you can block the Windows 10 update for 35 days using this functionality. 

Note: The most recent updates must first be installed when the pause limit has been reached, although, in order to restart suspending updates.

Method 3: Group Policy Modification

Hence, to turn off windows update, you can attempt to change the Group Policy on your device. You might interrupt the Windows 10 update download in progress by modifying the Group Policy as indicated in the instructions below-

Step 1: Access the Local Group Policy Editor
  • First, when the Run dialog box appears, type gpedit. msc by pressing the Windows key and R consecutively.
  • Next, to proceed further, press the OK button.
Step 2: Research the Automatic Updates Configuration
  • Here, follow the path Computer Configuration > Administrative Templates > Windows Components > Windows Update to discover the Windows Update folder in the left side of the Local Group Policy Program window.
  • Secondly following that, double-click Configure Automatic Updates in the right panel.
Step 3: Set Up and Run Automatic Updates
  • Firstly, select Enabled to proceed from the pop-up window.
  • Then, in the Configure automatic updating section, end up choosing Notify for download and automatic installation from the drop-down option.
  • Finally, to proceed, press on OK.

Note: Once all of the aforementioned actions have been completed, restarting your computer will turn off the Windows 10 update.

Method 4: End up Turning Off the Windows 10 Update Service

You may simply turn off the Windows Update service, which automatically updates and applies Windows 10 updates over the Internet, to stop windows updates from becoming downloaded and installed. Kindly follow the steps below –

Step 1: Access to the Service Window in your Device
  • First, to enter the Run dialog box, simultaneously press the Windows key and the R key.
  • Secondly, in the box there, simply type services.msc.


  • Hence, for the next step, press Enter or OK.
Step 2: Turn off the Windows Update Service
  • At first, try to locate the Windows Update service and double-click it in the level processes.
  • Secondly, choose Disabled as the Startup type in the popup window. Next, put the Service status in Stop mode after that.

Disabled in the Startup type

  • Hence, to put the changes into effect, click Apply and OK.

Closing Lines

We hope that you got your answer on “how to stop windows 10 update”. We believe that all of the above simple methods we provided will definitely help you out fix it. After all, if you are still facing issues on this, kindly let us know in the comments section below. 

Frequently Asked Questions

Q1: How to stop windows update in progress?

Ans: To stop Windows update, follow the steps – 

  • Choose “Control Panel” > “System and Security” > “Security and Maintenance” > “Maintenance” Abandon Maintenance.
  • In order to stop any pending upgrades and future ones, deactivate Windows’ automatic updates.
  • Now, block automatic updates in Windows Group Policy Editor on Windows 10 .

Q2: How to disable automatic updates?

Ans: To disable auto-updates, follow the steps –

  • First, press on Start > Settings > Control Panel > System.
  • Choose the Automatic Updates tab.
  • Now, toggle off automatic updates by clicking then tap on  Apply.
  • Select OK.
windows 10 compatibility checker (1)

An upgrade is something that is needed very much in everything whether it be your life or your devices. There are always new and better changes coming in for the operating systems of our PC. That development and introduction of new features can make our devices advanced and technology forward. Moreover, who wants to be working with an old version when you can work with the newly launched version?

A similar thing works for Windows as well. The launch of a new Windows means getting a much better version with better specs and advanced features. But there’s one thing that might be the one to be checked. That is the compatibility of your device with Windows 10. Now you might think, how do I check my computer for Windows 10 compatibility? Are you also struggling with the same question revolving in your head then this is what you need? The following article has all the needed information about minimum requirements for Windows 10 along with Windows 10 requirements for PC.

Why did You Choose Windows 10 for your PC?

Before getting to know about how to check my computer for Windows 10 compatibility you should first have to know why you should choose Windows 10 for your PC. Here are some Windows 10 features that will make you want to get it for your PC:

windows 10 compatibility checker

  • The speed provided in the version of Windows is just amazing as it makes the operating system run smoothly and hassle-free.
  • Security is one of those features that make Windows 10 more secure and also allows many security features along with malware protection and threat exploit protection.
  • Virtual desktops are something that only Apple users enjoyed but now with Windows 10, you get this great feature of having the ability to switch several virtual desktops.
  • Other than these there are many other features such as Voice Typing, A Better Browser, Xbox App improvement, Supercharged copy and paste clipboard, Nearby Sharing etc.

These reasons are enough to lure a person to get Windows 10 for their device. Now let’s get to the answer to the frequently asked question by many. ”How do I check my computer for Windows 10 compatibility?”

Basic Requirements to Run Windows 10 on your Computer

windows 10 system requirements

  •  Processors

 Your computer should have a processor that is 1 gigahertz or (SoC) to fulfill these basic Windows 10 system requirements.

  • Hard Drive Space

 To run Windows 10 on your device you should have 16 GB for 32-bit OS and 32 GB for 64-bit OS. This is one of the requirements that would fulfill the Windows 10 system requirements.

  • Display

The required display for Windows 10 is 800×600, if you fulfill this display requirement then the display-related compatibility is fulfilled for Windows 10.

  • Graphic Card

Your device must have a Graphic card of  DirectX 9 or WDDM 1.0 driver to be compatible with running Windows 10.

  • Internet Connections

 To run Windows 10 smoothly after its installation you need a good internet connection as it might ask to perform some updates or installation of additional apps. Therefore, it is necessary to have a good internet connection for your device to work with Windows 10.

All these above-mentioned are the basic Windows 10 requirements for PC. It is very important to check all these requirements before updating to Windows 10. If you won’t keep in check with the requirements then you might get in trouble as your device may not support Windows 10, if they lack any of these requirements. 

So if you too are planning to get Windows 10 for your device then you should firstly check all these requirements. If your device attains all these compatibility checks then you are all set to enjoy the updates of Windows 10 on your device.

 Windows 10 Compatibility Checker

If you are not sure even after checking all these things manually you can use different compatibility checkers. One such way to check your compatibility with Windows 10 is through Microsoft’s official site. Follow the given steps to check your compatibility with Microsoft’s official website:

 Windows 10 Compatibility Checker

  • Open the official site of Microsoft and go to the Windows 10 download page.
  • Click on the update now.
  • This will download the Windows 10 update assistant tool.
  • Now run the tool as administrator by right-clicking on the tool.
  • It will take you to the page where you have the latest version of Windows.
  • This would further lead you to the automatic Windows compatibility check.
  • Next, this will enable you to find out if your device is compatible or not. along with that, you would be informed about what are the things that are not according to the Windows requirement.
  • The easy compatibility would make it even easier for you to decide if your computer is compatible with Windows 10.

Final Say 

Windows 10 is one of the most used Windows as stated by Microsoft but if you are still not familiar with Windows 10 then you might be living under a rock. It’s high time you update to Windows 10. For that, you must first look out for the compatibility that you need to fulfill to run Windows 10 on your device. Now you might think of how I check my computer for Windows 10 compatibility. All in all, the answers to this question are all crafted in the above article to make it easy for you to check the compatibility of your device with Windows 10.


1. Can my PC run Windows 10?

Yes, you can run Windows 10 on your PC if the following requirements are fulfilled your computer:

  • Processor:1 GHzz faster
  • RAM: 1 GB for 32-bit or 2 GB for 64-bit
  • Hard drive: 16 GB for 32-bit or 32 GB for 64-bit OS.
  • Display: 800×600
  • Graphic card: DirectX9 or WDDM 1.0 driver. 

2. How do I upgrade my computer’s window?

If you want to upgrade your computer’s Windows then follow the given steps:

  • Click on the “Start” button
  • Then go to settings
  • Click on “update and security”
  • Click on the Windows update and your Windows will be updated to the latest version.

3. Which Windows is best for my computer?

Although it depends on device to device and requirements but rating it on a broader basis, it is said that Windows 10 is the most compatible, advanced and secure Microsoft OS.

How To Tell If Your Computer Has Been Hacked Windows 10

In recent times, technology is at its peak. From shopping to work, mostly everything is done digitally. People use laptops and PCs for studying, working, storing important data, watching movies, listening to music, etc. It has become a part of everyone’s life. 

As Windows comes with new safety features, hackers also find new ways to invade it. In such a scenario, it becomes more important to take the necessary steps to save your Windows from hacking. After all, your system has all your important information and data. If a hacker got to enter your Windows, he can easily have access to other things like bank accounts and social media. 

How To Tell If Your Computer Has Been Hacked Windows 10?

signs that you have been hacked

Do you want to know, how to tell if your computer has been hacked Windows 10? Well, here we will tell you about some signs that your laptop or PC might show if it’s been hacked. 

  • Your laptop or computer is acting strange. 
  • The webcam lights up even when you’re not using it.
  • Some activities are being conducted through your account that you’re not doing.
  • You can’t log in to your account.
  • You get information from the hacker that they have hacked your Windows, PC, or Laptop.
  • Your browser is not working properly.
  • You get an email or message from Windows regarding unauthorized login.

What To Do When You Have Been Hacked?

What To Do When You Have Been Hacked

Now that you know, how to tell if your computer has been hacked Windows 10, let’s see what you can do when your computer has been hacked. 

  • System Restore

Once you come to know that you have been hacked, wipe out the hard drive and perform a system restore. Because, once your Windows is hacked, it cannot be trusted again until it has a new Windows. Install a new Windows on your laptop or PC.

  • Change Password

Change Password

When you’re certain that your computer has been hacked, make sure that you change all the passwords, be that your laptop or computer password, social media passwords, Windows passwords, Email passwords, etc. This is necessary because once a hacker gets access to your computer or Windows, he can have access to all the accounts you were using from that particular computer. 

  • Delete All the Sensitive Information

If there is any sensitive information on your account that might put you in trouble if the hackers get it, then delete all that information immediately. It can be some pictures that hackers might use to blackmail you or your bank details. 

  • Turn on Two-Factor Authentication

Turn on Two-Factor Authentication (How To Tell If Your Computer Has Been Hacked Windows 10)

If you have been hacked then after performing a system restore, make sure that you turn on Two-Factor Authentication. By this, whenever there is some unauthorized activity or login, you will receive a message on your recovery mobile number or email. 

Basically, Two-Factor Authentication is like a double lock. So, even if you know the password and enter it correctly, you’ll have to enter the code sent by windows on your recovery phone number or email to get access to your account. You can use this feature for your social media accounts as well. 

  • Check Your Social Media Accounts 

The hackers might post some messages from your social media accounts to blackmail you into giving them money. If any unauthorized activity is performed from any of your social media accounts then change the password. In case you’re not able to login into your account, you can use the account recovery tools and by proving your identity, you can get your account back. 

  • Check Your Bank Balance and Bank Statement

The ultimate aim of hackers is the monetary benefit. So, if your account has been hacked, check your bank statement. If there is any transaction that you didn’t perform then complain about it to the bank and cyber police. Also, ask the bank to freeze your bank account and debit and credit cards so that hackers cannot make any further transactions. 

  • De-Authorize Other Accounts

There is an option where you can save your passwords and allow yourself to log in without entering the password if you’re using a particular Computer or PC. Delete all the saved passwords and de-authorize the other accounts from the ‘remember me’ option. It will save the other accounts even if your Windows has been hacked. 


Final Words

With the advancement of Windows security, hackers are also advancing. No matter how good security features you use, there are chances of hacking. The best thing is to stay awake and take immediate action as soon as you come to know that you have been hacked. 

FAQs: Frequently Asked Questions

Q1- Can hackers hack Windows 10?

Considering the technologies that hackers have today, yes, they can hack Windows 10. The hackers can hack Windows 7, 10, iOS, Mac, and Android. So, it is the responsibility of the user to use strong passwords and double authentication. 

Q2- Is Windows 10 easily hacked?

Unfortunately, Yes. Windows is working day and night to provide high security for its system. But, hackers find new ways of breaking the security shield provided by Windows. Though to make Windows 10 more secure, you can use its two-factor authentication feature. 

Q3- Is Windows 10 still secure?

Yes, Windows 10 is comparatively more secure than the previous Windows versions. But, hackers have also found better ways to invade Windows protection. The best way to save your Windows from hacking is by using strong passwords. 

Q4- How I know if my PC is hacked?

It will certainly show some signs. Your PC might start acting strange or your webcam might light up even when you’re not using it. To know more about these signs, read how to tell if your computer has been hacked Windows 10 from the above article.

how to make a copy of a word document

Do you have many questions like, how to duplicate a word document? How to copy a page in word? How to share a word document for editing? How to duplicate word document? Well, here we will tell you about different ways to create a copy of a Word Document. 

Word files are something that we all have been using since we started using computers. Word files are used for various purposes like studying, keeping records, writing your feelings, and other official purposes. 

Now that you are wondering how to make a copy of a Word Document, we will tell you about some easy and quick ways to make a copy of a Word Document. Therefore, follow the list given below for all the information.

Benefits of Making Copy of Word Documents

  • Helps in keeping a backup of all the important documents.
  • Makes the work easy when you need multiple documents with slight changes.
  • If you want to make temporary changes, so it saves the original document from alterations.
  • It helps if you accidentally delete the original document.

How to Make a Copy of a Word Document

Now that you know about the benefits of having a copy of the Word documents, let’s see how to actually do it. The following ways will work well with Windows 2007, 2013, 2016, and 2019. 

Copy and Paste in Windows

Copy and Paste in Windows

Step 1: Right click on the Word file that you want to copy. 

Step 2: When the context menu appears, Click on Copy.

Step 3: Open the folder where you want to save the duplicate Word document.

Step 4: Right-click in the folder again.

Step 5: Select the Paste option.  

Open the Word Document as Copy in Word

Open the Word Document as Copy in Word

Step 1: Open the Word document.

Step 2: Click on the File tab that is there on the upper left corner of your screen.

Step 3: Hit the Open option.  

Step 4: Tap on Browse, now select the document that you want to duplicate. 

Step 5: Now, click on the upside-down triangle appearing behind the open option.

Step 6: Select Open as Copy.

Step 7: Now from the file name you can determine that you have opened a duplicate file

Step 8: Select the Save or Save as option to save the duplicate file. Change the name and location, if needed. 

Create a New Word Document by New From Existing Option 

Step 1: Open the Word document that you want to create a duplicate of.

Step 2: Click on the File tab.

Step 3: Tap on the New option.

Step 4: Go on the right panel and select the New from Starting option. 

Step 5: From the New From Existing Document option, select the document that you want to duplicate. 

Step 6: When you have selected the file, click on Create New option. 

Step 7: After this, select the Save or Save as option to save the file, change the name and location if needed.

Open the Word Document as New One

Create a New Word Document by New From Existing Option 

Step 1: Right-click on the Word file that you want to copy. 

Step 2: As the context menu appears, select the New option.

Step 3: The name of the new document will change, mostly it will be 1,2, or 3. 

Step 4: If you don’t want to make any changes to the new document, select the Save option to create a clone of the original document.

Step 5: If you want to make any changes to the new document, make the necessary changes. When you close the document, you’ll receive a warning message saying so, if you want to save the changes, select that option.  

Step 6: Select the Save option to continue. 

Step: At the end, it will ask to select the location of the duplicated document and change its name.

Step 7: Select the Save option. 

See, it was as simple as that! You have created a duplicate Word document. If you want to create multiple copies then you can repeat these procedures. 


Final Say

Now your “How to make a copy of a Word Document” has been resolved. Now you have 4 different ways to make a copy of the word document. You can make a duplicate Word document in any of the above ways that suit you well.

FAQs- Frequently Asked Questions

Q1- How to share a word document?

The easiest way to share a Word document is through Email. Open your Email. Go to Compose. Enter the email address of the person you want to share your word file with. Attach the Word Document. Now click on the send option. You can also share the word document via Google drive.  

Q2- How to duplicate a word document on mac?

If it’s a Word Document so the process to create duplicates would be the same on Mac as well. Right-click on the Word Document that you want to make a copy of. Click on the Copy option. Open the folder where you want to save the duplicate file. Now again right click and select the Paste option. 

Q3- How to save a word document to the desktop?

If you want to save a Word Document on the desktop then you can simply Cut the word document from the existing folder and Paste it onto the desktop. If you want to create a duplicate of a Word Document then you can Copy the Word Document and then Paste it onto the desktop.